Chukar Pipe, Tube, and Structural - Phoenix, Arizona - Tube Bending - Pipe Bending - Sheet Metal - Metal Forming - Rolling, Bending and Forming Structural Shapes - Welded Fabrication - Bike Racks - Utiliry Security Enclosures / Back-Flow Theft Prevention Cages - Located at: 1010 N. 18th Ave., Phoenix, Arizona - Phone 602 252-8282 - Fax 602 252-8346

| READ MORE |

 W16 x 26 # Beam formed to a 60 Inch Inside Radius by 27 Degrees. This item will be used for a trolly track.

W16 x 26 # Beam formed to a 60 Inch Inside Radius by 27 Degrees. This item will be used for a trolly track

 

 4 In. x 240 SS40 .160 In. Wall formed to a 24 Inch Inside Radius. AND 6 5/8 Inch Sch 40 x .280 Wall formed to a 24 Inch Inside Radius. This item will be used as a fencing post.

4 In. x 240 SS40 .160 In. Wall formed to a 24 Inch Inside Radius. This item will be used as a fencing post.
6 5/8 Inch Sch 40 x .280 Wall formed to a 24 Inch Inside Radius. This item will be used as a fencing post.

 4 1/8 Inch Round 16ga Copper Tubing formed to a 37 In inside radius. This item will be used as down spouts.

4 1/8 Inch Round 16ga Copper Tubing formed to a 37 In inside radius. This item will be used as down spouts

 4 inch x 120 wall HREW 3.625 x 188 Wall HREW formed to 2288 MM center line radius over 174 degrees x 283 inches

4 inch x .120 wall HREW , 3.625 x .188 Wall HREW formed to 2288 MM center line radius over 174 degrees x 283 inches.

 6 Inch x 10 Inch x 1/4 Inch Rectangular Tube Steel formed to a 18 ft 9 in Inside Radius. This tubing was used for decorative purposes in a custom home.

6 Inch x 10 Inch x 1/4 Inch Rectangular Tube Steel formed to a 18 ft 9 in inside Radius. This tubing was used for decorative purposes.

 Stainless Steel Boiler Returns

Stainless Steel Boiler Returns

 3 Inch Square Tubing formed to a 2 ft 2 in inside radius.

3 Inch Square Tubing formed to a 2 ft 2 in inside radius.

 2 1/2 Inch Round x .120 In. Stainless Steel Tubing w/ Satin Finish formed to a 90 Degree elbow bend with a 3 Inch Inside Radius.

2 1/2 Inch Round x .120 In. Stainless Steel Tubing w/ Satin Finish formed to a 90 Degree elbow bend with a 3 Inch Inside Radius.

 3 In OD x .120 wall 304 SS formed to 39.00 ID 360 degree ring.

3 In OD x .120 wall 304 SS formed to 39.00 ID 360 degree ring.

 1 1/2 Inch Round Polished Stainless Steel Tube formed into a Pool Hand Rail.

1 1/2 Inch Round Polished Stainless Steel Tube formed into a Pool Hand Rail.

 2 In Sch 80 x 21 Ft pipe formed to a 200 Inch Center Line Radius.

2 In Sch 80 x 21 Ft pipe formed to a 200 Inch Center Line Radius.

 SL-1 (Single Loop) Bike Rack made from Galvanized Pipe.

SL-1 (Single Loop) Bike Rack made from Galvanized Pipe.

 Four SL-1 Galvanizd BIke Racks.

Four SL-1 Galvanizd BIke Racks.

 RB-9 Bike Rack powder coated brown. (This rack holds 9 bikes and has 7 loops.)

RB-9 Bike Rack powder coated brown. (This rack holds 9 bikes and has 7 loops.)

 RB-5, RB-7, and RB-9 Bike Racks in Type 304 Stainless Steel.

RB-5, RB-7, and RB-9 Bike Racks in Type 304 Stainless Steel.

 Custom Utility Security Enclosure

Custom Utility Security Enclosure

 Utility Security Enclosures for Gas, Water, Electric, etc. (Also known as Back Flow Theft Prevention Cages)

Utility Security Enclosures for Gas, Water, Electric, etc. (Also known as Back Flow Theft Prevention Cages)

   
   
   

Pipe, Tube & Structural Forming:
Angle to 10 x 10 x 1
          Beam to 24 x 100 lb Easy Way.
          Beam to 16 x 90 lb Hard Way (Split and Welded to W30)
                    Channel to MC18 Easy Way
                    Channel to 15 inch Hard Way
                              Rectangular Tube to 24 x 8 x .75 Easy Way
                              Rectangular Tube to 16 x 8 x .50 Hard Way
                                        Solid bar stock to 24 x 2 Easy Way
                                        Solid bar stock to 12 x 2 Hard Way
                                                  Square Tube to 16 x 16 x .750 wall
                                                  Round Tube and Pipe to 16 inch Schedule 80

Metal Working      Punching
                                   Tube Notching

Press Forming      3/8 in x 12ft to x 6 Ft
                                   Deep Channel Forming to 10 ft long,
                                          Cylinders, Cones, Half Spools,
                                                 Dished LP heads to 12 inches deep and 8 ft diameter

Metal Cutting      Shearing to 3/8 Plate x 12 feet wide
                                   Sawing to 16 x 16 with Miter Cut
                                          Gas, Laser, Plasma, Water Jet

Welding      MIG, TIG, Plasma,    Carbon Steel, Alloy Steel, Stainless Steel, Aluminum

Machining      Turning, Milling, Short run, Repairs

   

| READ MORE |